Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 213)

100

101

Customizing OSPF Services

308627-14.20 Rev 00

6-29

Each type of subnet has a typical Hello interval. Table 6-4 lists the suggested

settings for subnet types supported by OSPF.

You can use the BCC or Site Manager to specify a Hello interval.

Using the BCC

To set the Hello interval, go to an OSPF interface prompt (for example,

box;

eth 2/2; ip/2.2.2.2/255.255.0.0; ospf

) and enter:

hello-interval

interval>

interval

is the number of seconds (from 1 through 65535) between Hello

messages.

For example, the following command sets the Hello interval to 20 seconds on

IP interface 2.2.2.2:

ospf/2.2.2.2#

hello-interval 20

ospf/2.2.2.2#

Using Site Manager

To set the Hello interval, complete the following tasks:

Table 6-4. OSPF Hello Interval Settings

Network Type Suggested Hello Interval (seconds)

Broadcast 10 (default)

Point-to-point 15

NBMA 20

Point-to-multipoint 15

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose Protocols.

The Protocols menu opens.

2. Choose IP. The IP menu opens.

3. Choose OSPF/MOSPF. The OSPF/MOSPF menu opens.

(continued)

1 2 ... 208 209 210 211 212 213 214 215 216 217 218 ... 389 390

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 213

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services