Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 159)

Customizing RIP Services

308627-14.20 Rev 00

5-15

Supplying a Default Route on an Interface

When the routing table does not contain the route to a particular destination

address, the router looks for a default route. Like any other route in the routing

table, the default route is acquired either dynamically (through a routing protocol)

or entered statically (by you).

By default, RIP does not advertise a default route. You can configure RIP to do the

following:

• Advertise an existing default route (one that is present in the routing table) in

RIP updates sent to neighboring networks.

• Generate a default route if the routing table does not contain a default route.

This default route is not included in the routing table.

This parameter is independent of the RIP supply parameter. A configured policy

can override the parameter.

Using the BCC

To specify whether an interface can supply or generate a default route, go to a RIP

interface prompt (for example,

box; eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and

enter:

default-supply

action

is one of the following:

enabled

disabled

(default)

generated

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear.

5. Set the RIP Listen parameter. Click on

Help or see the parameter description on

page A-63.

6. Click on Apply, and then click on Done. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 389 390

Brak uwag

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 159