Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Instrukcja Użytkownika Pobierz pdf (Strona 165)

100

101

Customizing RIP Services

308627-14.20 Rev 00

5-21

Specifying a Holddown Period

When RIP determines that a network is unreachable, RIP continues to advertise a

route to that network for a default holddown period of 90 seconds. If you enabled

dial-optimized routing on this interface, the default is 3 hours.

You can use the BCC or Site Manager to set the holddown period from 15 seconds

through 259,200 seconds (72 hours). For dial-optimized routing, the maximum

value is 3,628,800 seconds (6 weeks).

You should set the holddown timer to a value equal to three times the value of the

update interval (see “

Specifying the Full Update Interval” on page 5-18).

Using the BCC

To specify the holddown period, go to a RIP interface prompt (for example,

box;

eth 2/2; ip/2.2.2.2/255.255.0.0; rip

) and enter:

holddown-timer

seconds

is the holddown period expressed in seconds.

For example, the following command sets the holddown timer to 60 seconds on IP

interface 2.2.2.2:

rip/2.2.2.2#

holddown-timer 60

rip/2.2.2.2#

4. Click on the RIP interface that you want to

edit.

The parameter values for that interface

appear in the IP RIP Interface

Configuration window.

5. Set the Timeout Timer parameter. Click

on Help or see the parameter description

on page A-65.

6. Click on Apply, and then click on Done. You return to the Configuration Manager

window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 160 161 162 163 164 165 166 167 168 169 170 ... 389 390

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services Instrukcja Użytkownika Strona 165

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Configuring IP, ARP, RARP, RIP, and OSPF Services