Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Pobierz pdf (Strona 66)

Configuring SNMP, BootP, DHCP, and RARP Services

3-16

303542-A Rev 00

Specifying a Trap Type

You can specify one of four types of traps that the SNMP agent can transmit to the

manager: Generic, Specific, All, or None. Table 3-2

describes these trap options.

Using the BCC

By default, the SNMP agent transmits Generic traps to the manager. To specify a

different type of trap, navigate to the manager-specific prompt and enter:

traps

trap_type

rap_type is either Generic, Specific, All, or None.

9. Choose

Edit Manager

. The SNMP Manager window opens.

10. Set the

Trap Port

parameter.

Click on

Help

or see the parameter

description on page A-6

11. Click on

. You return to the Configuration Manager

window.

Table 3-2. Trap Types Transmitted by the SNMP Agent

Trap Type Description

Generic This is the default trap type. It transmits the well-defined SNMP traps

(cold-start, warm-start, and authentication failure traps) to the manager.

The cold-start and warm-start traps are automatically active in the SNMP

agent; however, you must enable the Authentication Failure Traps

attribute for the agent to transmit such traps to a specified manager.

Specific Allows you to configure the agent software to transmit all enabled log

event traps to a specified manager.

All Allows you to transmit cold-start and warm-start traps, and all enabled log

event traps, to a specified manager.

None Prohibits the SNMP agent from transmitting traps to a specified manager.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 145 146

Brak uwag

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Strona 66