Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Pobierz pdf (Strona 136)

Configuring SNMP, BootP, DHCP, and RARP Services

A-22

303542-A Rev 00

Parameter: Enable/Disable

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv > Add

Default: Enable

Options: Enable

Disable

Function: Specifies whether the forwarding route is active.

Instructions: Select Enable to allow BootP or DHCP forwarding through this route. Select

Disable to prevent BootP or DHCP forwarding through this route.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.2

Parameter: Target Name

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv > Add

Default: None

Options: Any string of printable ASCII characters, up to 63 characters in length,

including embedded spaces

Function: Specifies the target server’s host name.

Instructions: If you want to keep track of the names of BootP or DHCP servers, enter the

target server’s host name.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.5

Parameter: Pass Through Mode

Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface

Table > Pref Serv > Add

Default: BOOTP

Options: BOOTP

DHCP

BOOTP and DHCP

Function: Specifies whether the interface relays BootP, DHCP, or both BootP and DHCP

requests.

Instructions: Select BOOTP to relay BootP requests. Select DHCP to relay DHCP requests.

Select BOOTP and DHCP to relay both kinds of requests.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.3.1.6

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 145 146

Brak uwag

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Strona 136