Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Pobierz pdf (Strona 118)

Configuring SNMP, BootP, DHCP, and RARP Services

A-4

303542-A Rev 00

Parameter: Lock Time Out

Path: Configuration Manager > Protocols > IP > SNMP > Global

Default: 2 (minutes)

Options: 1 to 60 (minutes)

Function: Specifies the maximum number of minutes the agent allows an idle network

management station to hold a lock on it. During this time, the agent locks out

SNMP

set

commands from other network management stations. The lock timer

is reset each time the locking manager issues an SNMP

set

command.

Instructions: Enter the number of minutes only if you set the Use Lock parameter to Enable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.1.4

Parameter: Authentication Failure Traps

Path: Configuration Manager > Protocols > IP > SNMP > Global

Default: Enable

Options: Enable

Disable

Function: Specifies whether the router attempts to generate an authentication failure trap

when it receives an SNMP message from an SNMP manager falsely claiming to

be in a particular community or specifying an unknown community.

Instructions: Select Enable to enable the router to generate authentication failure traps. If you

select Enable, you must configure an SNMP manager to receive the trap. You

configure a trap in the Trap Configuration window.

Select Disable to prohibit the router from generating authentication failure traps.

MIB Object ID: 1.3.6.1.4.1.18.3.5.3.5.1.3.5

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 145 146

Brak uwag

Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Strona 118