
SNMP, BootP, DHCP, and RARP Parameter Descriptions
303542-A Rev 00
A-19
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table > Forward I/F > Add
Default: Enable
Options: Enable
|
Disable
Function: Specifies whether this forwarding route is active.
Instructions: Select Enable to allow BootP or DHCP forwarding through this route. Select
Disable to prevent BootP or DHCP forwarding through this route.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.2
Parameter: Pass Through Mode
Path: Configuration Manager > Protocols > IP > BOOTP > Relay Agent Interface
Table > Forward I/F > Add
Default: BOOTP
Options: BOOTP
|
DHCP
|
BOOTP and DHCP
Function: Specifies whether the interface relays BootP, DHCP, or both BootP and DHCP
requests.
Instructions: Select BOOTP to relay BootP requests. Select DHCP to relay DHCP requests.
Select BOOTP and DHCP to relay both kinds of requests.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.8.3.2.1.5
Komentarze do niniejszej Instrukcji