Avaya Configuring SNMP, BOOTP, DHCP, and RARP Services Instrukcja Użytkownika Strona 137

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 146
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 136
SNMP, BootP, DHCP, and RARP Parameter Descriptions
303542-A Rev 00
A-23
RARP Interface Parameters
Use the following guidelines to configure RARP interface parameters in the
RARP Interface Table window.
RARP Address Parameters
Use the following guidelines to configure RARP address parameters in the RARP
Addresses window.
Parameter: Enable/Disable
Path: Configuration Manager > Protocols > IP > Reverse ARP > Interface Table
Default: Enable
Options: Enable
|
Disable
Function: Reenable or disable the RARP interface you selected from the list of interfaces.
Instructions: Select Enable to reenable a disabled interface. Select Disable to disable an
interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.3.1.2
Parameter: MAC Address
Path: Configuration Manager > Protocols > IP > Reverse ARP > Map Table > Add
Default: None
Options: Any valid MAC address
Function: Specifies the MAC address of a client that will use the RARP services of this
router.
Instructions: Enter the MAC address of a client.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.9.2.1.2
Przeglądanie stron 136
1 2 ... 132 133 134 135 136 137 138 139 140 141 142 ... 145 146

Komentarze do niniejszej Instrukcji

Brak uwag