Avaya BCM 4.0 Networking Przewodnik Konfiguracji Pobierz pdf (Strona 425)

100

101

425

BCM 4.0 Networking Configuration Guide

Chapter 47

T.38 fax

If you are using the T.38 fax protocol, it is assumed that you have already configured IP trunks and

gateways, and that they are functional. For more information on configuring VoIP trunks see

“Configuring lines” on page 165.

T.38 fax is a Fax over IP (FoIP) gateway protocol that allows standard (T.30 or Group3) fax

machines to make calls over IP-based networks. The T.38 fax protocol functions transparently

with standard fax machines because it emulates a normal T.30 fax connection. Each endpoint of

the IP trunk becomes a T.38 gateway. To use FoIP, you must have two or four MS-PEC III cards

installed in your MSC card. Both endpoints must support the T.38 fax protocol and have this

feature enabled.

Enabling T.38 fax

Complete these procedures to enable the T.38 fax protocol.

To verify codecs in Element Manager

1 Click Configuration > Telephony Resources.

2 In the Telephony Resources panel, select the row for IP Trunks on Bus 0.

The details panel appears.

3 Click the H323 Media Parameters or the SIP Media Parameters tab.

4 Verify that the preferred codec appears in the Selected List field.

1 2 ... 420 421 422 423 424 425 426 427 428 429 430 ... 757 758

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya BCM 4.0 Networking Przewodnik Konfiguracji Strona 425

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya BCM 4.0 Networking