
132 Chapter 8 Configuring telephony resources
N0060606N0060606
Provisioning module lines/loops
There are three provisioning subpanels, which can be accessed in Element Manager at the path
Element Manager: Configuration > Resources > Telephony Resources. The tabbed
provisioning panel that appears depends on the type of module that is selected on the Telephony
Resources table.
The provisioning subpanels are as follows:
• The Provision Lines tab panel is used for all trunks except DPNSS and BRI loops.
• The DPNSS module displays the Provision Virtual Channels tab panel.
• BRI loops require an extra step, so the Provision Loops tab panel appears when a BRI
module is selected.
Table 29 describes the fields on these panels.
Version <read-only>
All modules
This field indicates the version of firmware running on the module.
DN XXXX
ASM/
GASM DSM
Each port supports one telephone, hence, one DN record.
Addons
All modules
Indicates auxiliary items added to the telephony devices or trunks
Add-on This is a list number.
Type This field indicates the type of add-on, such as a KIM module.
Version This field indicates the version of firmware running on the add-on device.
Table 29 Provisioning panels (Sheet 1 of 2)
Field Value Description
Provision Lines tab
Line <line number> This is a list of the lines assigned to the module.
Provisioned <check box> If the check box is selected beside a line, that line is available for call
traffic.
Provision Virtual Channels tab
Virtual Channel <read-only> A virtual channel assigned to the DPNSS module.
Provisioned <check box> If the check box is selected beside a channel, that channel is
available for call traffic.
Provision Loops tab
Loop <loop-number> These are the loop numbers assigned to the selected BRI module.
Modules have four loops, but only loops designated as T-loops
require provisioning.
Table 28 Port Values tab (Sheet 2 of 2)
Attribute Value Module type
Komentarze do niniejszej Instrukcji