Avaya Configuring and Managing Routers with Site Manager Instrukcja Użytkownika Pobierz pdf (Strona 197)

Customizing Router Software Images

309081-14.20 Rev 00

6-17

Select the appropriate image format, then click on OK.

An empty Image Builder window opens.

You can now build a new image using the router software on your

workstation. See “Using the Image Builder to Modify the Software Image

” on

page 6-10

for instructions.

Converting an Image for Other Types of Routers

If you want to run the same image on different types of Nortel Networks routers in

a network, you can create an image for one type of router and convert the image to

run on other types of routers. For example, you might want to run the same

protocols on AN and BN routers in a network. You can customize an image for the

BN routers and then convert that image to run on the AN routers.

You can use this feature only to convert to image formats that you previously

loaded into the Image Builder.

To convert an image for a different router type:

1. In the Image Builder window, choose File > Change Format.

A window with a list of image formats opens (see Figure 6-6

2. Confirm that the format you want is available.

If you cannot select the image format you want because it is dimmed, you

have to load the image associated with that image format into the Image

Builder. See “Loading Image Files into the Image Builder” on page 6-7

for

instructions.

3. Select a format from the list.

The image changes to the format you selected.

4. Save the modified image.

See “Saving a Modified Image

” on page 6-14 for instructions.

1 2 ... 192 193 194 195 196 197 198 199 200 201 202 ... 385 386

Brak uwag

Avaya Configuring and Managing Routers with Site Manager Instrukcja Użytkownika Strona 197