
Configuring Dial Services
8-6
114062 Rev. A
Parameter: Inactivity Time
Default: 60 seconds
Range: 1 to 99999999 seconds
Function: Measures the data inactivity on the line. Specifically, it determines the
number of seconds that can elapse
without
data activity before the router
disconnects the line. Each time data passes through the router, the
Inactivity Time resets.
This timer works with the Inactivity Mode parameter to determine how
inactivity is monitored. Once the router concludes that there is no data
activity, it disconnects the line.
Instructions: Specify a time limit, between 1 and 99999999 seconds, that the router
waits before bringing the switched connection down.
If you want the dial line to remain up at all times, enter 99999999. The
connection remains up unless the network brings down the connection. If
the connection is brought down, the router redials the same number when
the next packet is ready for transmission. You can also manually force the
router to establish a call if a line is available.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.5.1.15
Parameter: Retry Max
Default: 2
Range: 1 to 10
Function: Specifies the number of attempts that the router makes to establish the
circuit. The router tries all of the phone numbers in the outgoing phone
list for a given line. If no connection is made, and there is still data to
send, the router increments the retry count, then retries these numbers on
the next line in the pool.
Instructions: Enter the number of times you want the router to try to establish the
circuit.
MIB Object ID: 1.3.6.1.4.1.18.3.5.1.4.5.1.25
Note:
The router does not consider LQR, LCP, and periodic CHAP messages
as data, so they do not reset the timer.
Komentarze do niniejszej Instrukcji