Avaya Business Secure Router 252 Configuration - Basics Instrukcja Użytkownika Pobierz pdf (Strona 76)

100

101

76 Chapter 4 User Notes

NN47923-500

b Enter the authentication information, with either a pre-shared key or an

imported certificate.

c Enter the IP Address assigned to the router WAN port. This should be a

static address, or a dynamic DNS name, and the IP address of the remote

router.

d Select the encryption and authentication algorithms.

e Add an IP policy, by specifying the IP address ranges of the local and

remote hosts that will use the tunnel.

2 Repeat these steps at the other end of the branch.

Note: If VPN Client Termination is used on these sites, the client termination

address range will need to be included in the tunnel policies in order for the

VPN clients to see the other site.

Adding IP telephony to a multi-site network

Scenario 1: A BCM50 in the primary site acting as the gateway for

both sites

1 Ensure that the DHCP Server in the BCM50 is disabled, that the BCM50 is

connected to the router, and both have booted.

2 Add the IP phones to the primary site as per BCM50 installation guide.

3 Create a tunnel to the remote site, as described above.

4 In the remote site, set the S1 and S2 addresses to the IP address of the

BCM50, which is identified in the router DHCP table or in the BCM50. This

is done with a CLI command.

TELNET or SSH to the router. This needs TELNET or SSH enabled on that

router. Select menu 24, select menu 8, and enter the commands:

ip dhcp enif0 server voipserver 1 <BCM50_IP_Address> 7000 1

ip dhcp enif0 server voipserver 2 <BCM50_IP_Address> 7000 1

5 Add the IP phones to the remote site, configured for full DHCP client mode.

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 459 460

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Business Secure Router 252 Configuration - Basics Instrukcja Użytkownika Strona 76

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Business Secure Router 252 Configuration - Basics