Avaya Business Secure Router 252 Configuration - Basics Instrukcja Użytkownika Pobierz pdf (Strona 234)

234 Chapter 13 VPN

NN47923-500

Virtual Ending IP

Address

When the Type field is configured to One-to-one or

Many-to-One, this field is N/A.

When the Type field is configured to Many One-to-one, enter the

ending (static) IP address of the range of IP addresses that you

want to use for the VPN tunnel.

Local Local IP addresses must be static and correspond to the remote

IPSec router's configured remote IP addresses.

Two active SAs can have the same local or remote IP address, but

not both. You can configure multiple SAs between the same local

and remote IP addresses, as long as only one is active at a time.

Two IP policies can have the same local or remote IP address, but

not both.

In order to have more than one active rule with the Secure

Gateway Address field set to 0.0.0.0, the ranges of the local IP

addresses cannot overlap between rules.

If you configure an active rule with 0.0.0.0 in the Secure Gateway

Address field and the full IP address range of the LAN as the local

IP address, then you cannot configure any other active rules with

the Secure Gateway Address field set to 0.0.0.0.

Address Type Use the drop-down menu to choose Single Address, Range

Address, or Subnet Address. Select Single Address for a single

IP address. Select Range Address for a specific range of IP

addresses. Select Subnet Address to specify IP addresses on a

network by their subnet mask.

Starting IP Address When the Address Type field is configured to Single Address,

enter a (static) IP address on the LAN behind your Business

Secure Router. When the Address Type field is configured to

Range Address, enter the beginning (static) IP address, in a

range of computers on your LAN behind your Business Secure

Router. When the Address Type field is configured to Subnet

Address, this is a (static) IP address on the LAN behind your

Business Secure Router.

Ending IP Address /

Subnet Mask

When the Address Type field is configured to Single Address,

this field is N/A. When the Address Type field is configured to

Range Address, enter the end (static) IP address, in a range of

computers on the LAN behind your Business Secure Router.

When the Address Type field is configured to Subnet Address,

this is a subnet mask on the LAN behind your Business Secure

Router.

Table 55 VPN Branch Office — IP Policy

Label Description

1 2 ... 229 230 231 232 233 234 235 236 237 238 239 ... 459 460

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Business Secure Router 252 Configuration - Basics Instrukcja Użytkownika Strona 234

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Business Secure Router 252 Configuration - Basics