Avaya EE Networking Podręcznik Użytkownika Pobierz pdf (Strona 86)

86 Configuring Services Settings

Enterprise Edge Networking Operations Guide P0910464 Issue 01

The LAN1 Summary and RIP Parameters Routing settings are:

1. From the Status list box enable or disable the router.

2. From the Packet Filtering list box enable or disable packet filtering.

3. From the RIP Log Level list box select the RIP log level.

4. In the Triggered Update Interval box type the triggered update interval.

5. Press the TAB key to save the settings.

LAN Routing

This section describes the instructions to configure LAN1 interfaces for routing. If

there are other existing LAN or WAN interfaces, they also appear in Routing.

Follow the same instructions to configure them.

1. On the navigation tree click the Routing navigation key to expand the menu.

2. On the navigation tree click LAN1.

Clicking the LAN1 navigation key causes the key to disappear. You must click

LAN1 to view the available services to configure.

The Summary, Input Filter, Output Filter, and Static Route screen appears.

Settings Definition

Description Shows a description of the router.

Version Shows the version of the router.

Status Lets users enable or disable the router.

Packet Filtering Lets users enable or disable packet filtering.

When the system comes up the first time, this value is N/A, indicating that the

Management system cannot retrieve pertinent information. Set it to Disabled

or Enabled and valid values are displayed. Disabling packet filtering here

disables it on all interfaces. The router performs better when packet capturing

is disabled.

RIP Log Level Lets users specify a log-level for the RIP routing protocol manager:

maximum generates the maximum log

warnings also, generates a log for warning conditions too

errors only, generates log errors only (for use during normal operations)

disabled disables logging (not recommended).

Triggered Update

Interval

Lets users specify the minimum interval between sending triggered updates.

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 181 182

Brak uwag

Avaya EE Networking Podręcznik Użytkownika Strona 86