Avaya EE Networking Podręcznik Użytkownika Strona 69

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 68
Configuring Resources Settings 69
P0910464 Issue 01 Enterprise Edge Networking Operations Guide
WAN Backup Link Parameters
The WAN Link Parameters are:
WAN Link Parameters Dialog Definitions
1. Scroll to see the WAN Link Parameters settings.
Setting Definition
Telephone Number Lets users specify a telephone number to be used to connect using
the modem interface. If needed, include area codes, if any, and all
necessary digits to dial an external number.
Alternate Telephone
Number
Lets users specify an alternate number to be used to connect using
the modem interface. Include area codes, if any, and all necessary
digits to dial an external number.
Connect Rate Lets users specify the initial speed (in bits per second) for the
modem to connect. Set to the maximum permissible value for best
results. Permitted values: 57600, 38400, 19200, 9600, 4800. Note:
This is the initial rate, actual rate is always negotiated.
Dial Retries Lets users specify the number of tries the system attempts to make a
link operational before marking it non-operational. A positive
number must be used.
Dial Interval Lets users specify the interval, in seconds, between successive
attempts to make a link operational.
Speaker Mode Lets users enable or disable the speaker during initial link
establishment.
IP Header Compression Lets users enable or disable IP header compression. To function, the
receiving end must utilize this feature to work.
Software Compression Lets users enable or disable data compression in the software,
instead of the modem. For dial-up connections, Unified Manager
uses Microstate Point-to-Point Compression algorithm (MPPC).
Hardware Compression Lets users enable or disable data compression in the hardware
instead of the software.
PPP LCP Extensions Lets users specify whether or not to enable or disable PPP LCP
extensions that include Time-Remaining, Identification, and
Callback features. The Callback feature is not supported even if
LCP extension is enabled.
Przeglądanie stron 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 181 182

Komentarze do niniejszej Instrukcji

Brak uwag