
58 Configuring Resources Settings
Enterprise Edge Networking Operations Guide P0910464 Issue 01
WAN Primary Link Summary Parameters
The WAN summary settings are:
To modify the configuration of the WAN1 or WAN2 summary screen:
6. In the IP Address box type the IP address.
7. In the SubNet Mask box type the subnet mask.
8. From the Link Protocol list box choose Frame Relay or PPP.
Note: If you choose Frame Relay, press the Tab key to update the screen. A
configurable WAN Frame Relay Parameters screen appears.
9. From the Compression Speed list box select the compression speed.
10. In the Frame Size box type the frame size.
11. Press the TAB key to save your settings.
Setting Definition
IP Address Lets users specify the IP address of the WAN interface in a valid dot format.
Type the data in the following dot format: 10.10.10.1.
SubNet Mask Lets users specify the subnet mask in a valid dot format of the WAN interface.
Type the data in the following dot format 255.255.255.0.
Physical Address Shows the physical address of the WAN interface.
Description Shows the description of the network interface card that supports the WAN
interface.
Version Shows the version indicator of the WAN interface.
Speed Shows the operational speed of the WAN interface.
Status Shows the current resource status of the WAN interface.
The possible states are:
Up: the resource is operational.
Down: the resource is not operational.
Link Protocol Lets users specify PPP or frame relay protocol.
If you change the link protocol, the configuration screen changes to include
fields corresponding to the link protocol you choose. To ensure proper
operation, always refresh the page by clicking
View
and then
Refresh
.
Compression
Speed
Lets users specify fast, medium, normal, slow, or no data compression
configuration.
Frame Size Lets users specify the maximum frame size for the layer-2 packet carried on
this port.
Komentarze do niniejszej Instrukcji