Avaya EE Networking Podręcznik Użytkownika Pobierz pdf (Strona 110)

110 Configuring Services Settings

Enterprise Edge Networking Operations Guide P0910464 Issue 01

Filter Lets users specify the entry name that is used as a key to uniquely identify an

individual filter entry in QoS layer. Its value must follow certain conventions.

It must have the prefix F followed by a unique number that identifies this

filter. For example, F2 is a valid value. While adding, specify non-recurring

values for the unique number.

While adding, if you specify an existing filter entry name, it modifies the

existing filter entry. Using non-sequential numbers results in automatic

reassignment of sequential numbers. While modifying a filter entry, you can't

change the name.

Source Address Lets users specify the source IP address in a valid dot format.

If you want to ignore the source address field in filter, leave this field blank. If

you specify an address in this field, you should also specify a subnet mask in

the Source Mask field.

Source Mask Lets users specify the source mask of the IP address in a valid dot format.

If you specify a source address, you must specify a source mask and vice

versa. Make sure that the mask and address match with each other, i.e. bitwise

and of mask and address is equal to the address.

If you want to specify a range of addresses, use a subnet mask other than

255.255.255.255. For example, address/mask combination 10.10.10.32/

255.255.255.252 represents addresses 10.10.10.32-10.10.10.35.

Destination

Address

Lets users specify a destination IP address in a valid dot format.

See the instructions for Source Address.

Destination Mask Lets users specify a mask for the destination IP address in a valid dot format.

See the instructions for Source Mask.

Source Port Lets users specify a source port to match the filter.

Specify a source port only if you choose a TCP or a UDP protocol. If you

don't want to include the source port in your filter, select IGNORE for it.

Otherwise, select the port for one of the well-known services from the list or

type it in the list box. If you type the port, specify the service's numeric port

number. You can specify a range of ports by specifying the two limits of the

range by a hyphen character, for example, 156-159. You can also specify 0 for

the lower limit and 65536 for upper limit.

Destination Port Lets users specify a destination port to match the filter. It is interpreted the

same way as source port.

Protocol Lets users specify a protocol to match the filter.

If you don't want to include a protocol in your filter, select IGNORE for the

protocol. Otherwise, select the protocol from the list or type the numeric value

of sub-protocol under IP in the box.

PortRange Lets users reserve and list different UDP port ranges that the Enterprise Edge

QoS module uses for VoIP RTP flows. Set the UDP ports to high priority so

that VoIP packets are forwarded quickly.

DSCode (TOS)

Criteria

Lets users specify the DS Code (TOS) value for the filter to match. Use this

setting only if your network or application behind Enterprise Edge is diffserve

capable or diffserve aware. Specify here the DS Code or TOS value that the

application or the other edge device puts in the IP packets it sends. Otherwise,

ignore this setting.

Setting Definition

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 181 182

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya EE Networking Podręcznik Użytkownika Strona 110

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Bramy / kontrolery Avaya EE Networking