Avaya SIP Software 4.0 for 1200 Series Instrukcja Użytkownika Pobierz pdf (Strona 49)

previously assigned settings after the IP Deskphone-specific configuration file is

deleted. This recommendation applies to other parameters in the IP Deskphone-

specific configuration file.

• AUTOLOGIN_AUTHID_KEYxx — is used for auto login when the

AUTOLOGIN_ENABLE method is configured to USE_AUTOLOGIN_ID.

If the config file does not contain AUTOLOGIN_AUTHID_KEYxx, the client uses the value

from AUTOLOGIN_ID_KEYxx.

• PROMPT_AUTHNAME_ENABLE — is used to determine if the authentication ID screen

is presented to the user. The default value is NO.

- YES - after the user login name is entered the authentication ID screen appears.

- NO - after the user login name is entered the password screen appears.

• AUTO_UPDATE [YES | NO] — is a command to enable or disable the automatic updating

of the IP Deskphone with SIP Software configuration files from the provisioning server.

Enabling this command causes the IP Deskphone with SIP Software to check for updates

once every day. The default is disabled.

- YES - turns on the AUTO_UPDATE feature.

- NO - turns off the AUTO_UPDATE feature.

Note:

If the IP

Deskphone encounters any Major or Critical error in memory during the Auto

update process, the IP Deskphone reboots based on the recovery level set.

• AUTO_UPDATE_TIME [x] — is the actual time in seconds, starting from midnight, before

an automatic update occurs. Each IP Deskphone adds random numbers to the time

specified by this command so every IP Deskphone does not try to access the provisioning

server at the same time. By default the automatic update feature is disabled (see

AUTO_UPDATE_RANGE).

- x - the time after midnight that the automatic update occurs.

• AUTO_UPDATE_TIME_RANGE [x] AUTO_UPDATE_TIME_RANGE [x] — is the range

in hours, from the AUTO_UPDATE_TIME where an IP Deskphone checks for updates

from the server. The default range is 1 hour.

- x — the range in hours when the IP Deskphone checks for updates from the server.

The range can be from 1 to 6 hours.

• TRANSFER_TYPE [MCS | STANDARD] is used to configure the IP Deskphone to

activate Avaya conference server-assisted attended transfers, instead of the industry

standard method of attended transfers. The default setting is Standard.

- MCS - the typical attended transfer used by Avaya proxies. MCS uses a conference

server to do the attended transfer.

- STANDARD - the standard method of a transfer. This method does not involve a

conference server.

Feature configuration commands

SIP Software for Avaya 1200 Series IP Deskphones-Administration November 2012 49

1 2 ... 44 45 46 47 48 49 50 51 52 53 54 ... 323 324

Brak uwag

Avaya SIP Software 4.0 for 1200 Series Instrukcja Użytkownika Strona 49