Avaya Connecting ASN Routers and BNX Platforms to a Network Instrukcja Użytkownika Strona 61

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 106
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 60
Configuring Network Booting
3-11
Netboot Interface Parameters
Parameter: Slot Number
Default: None
Range: 1 to 4
Function: Specifies the assigned slot number for the physical slot in which the net
module for this connector is installed.
Instructions: Type the appropriate slot number in the Slot Number box.
MIB Object ID: None
Parameter: Module Number
Default: None
Range: 1 to 4
Function: Specifies which net module supports the connector.
Instructions: Type the appropriate module number in the Module Number box.
MIB Object ID: None
Parameter: Connector
Default: None
Options: COM1
| COM2 | XCVR1 | XCVR2
Function: Identifies the connector configured as a Netboot interface.
Instructions: Enter the connector name for the Netboot interface. To use Netboot over a
synchronous interface, enter COM1 or COM2. To use Netboot over an
Ethernet interface, enter XCVR1 or XCVR2.
MIB Object ID: None
Przeglądanie stron 60
1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 105 106

Komentarze do niniejszej Instrukcji

Brak uwag