Avaya Connecting ASN Routers and BNX Platforms to a Network Instrukcja Użytkownika Pobierz pdf (Strona 23)

Selecting a Boot Configuration

1-3

initially

start up the ASN, you can use one of these options:

• EZ-Install (the default)

• Netboot

• Local Boot

To start up the ASN

after

the initial conﬁguration, you use one of these boot

conﬁguration options:

• Netboot

• Directed Netboot

• Local Boot

Table 1-1 summarizes the startup options. The section that follows, “The Network

Boot Process,” describes what happens when you use each option.

Table 1-1. Summary of Boot Options

Boot

Option

Source for

Software

Image

Source for

Conﬁg File Description and Requirements

EZ-Install

Local

(Flash

memory)

Network

(Synchronous

connection)

The default option. The ASN boots from a software image in

local memory, then transmits a request for its IP address

and conﬁguration ﬁle through an attached synchronous

interface.

Next, a remote UNIX- or DOS-based workstation that is

conﬁgured as a Boot Protocol (BOOTP) server downloads a

customized conﬁguration ﬁle; you save that conﬁguration to

Flash memory.

Requires a communications link over an HDLC or Frame

Relay interface.

If EZ-Install fails, the router tries the Local Boot procedure.

(continued)

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 105 106

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Connecting ASN Routers and BNX Platforms to a Network Instrukcja Użytkownika Strona 23

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya Connecting ASN Routers and BNX Platforms to a Network