Avaya Synchronous Net Modules in an ASN Platform Instrukcja Użytkownika Pobierz pdf (Strona 25)

Removing Filler Brackets

Test Part Number BNX Software Version <x.x> Installing a Net Module5

Removing Filler Brackets

Filler brackets cover empty ASN net module positions and the openings above

positions 1 and 3 (Figure 1-2). When you install a net module, you must remove

the ﬁller brackets from the openings above positions 1 and 3, and also from the

position in which you want to install the net module.

To remove a ﬁller bracket, grasp its top edges. Then lift the bracket up and toward

the front of the tray to release the metal tabs. (Remember that the net module ports

are exposed at the back of the tray.)

Figure 1-2. Locating Net Modules and Filler Brackets

Removing a Net Module

Read this section if you need to install the net module in a slot that already

contains one. To remove a module from position 2 or 4 (Figure 1-2), you must ﬁrst

remove the ﬁller bracket and net module (if any) above it. See the previous

section, “Removing Filler Brackets.”

Note: This manual refers to the end of the component tray where the net

module ports are exposed as the “back end” of the tray. To perform

maintenance tasks on the ASN components, you face the back end of the tray.

Caution: Do not touch any components or boards in the ASN until you have

attached the antistatic wrist strap.

Net module filler

bracket

Expansion

bracket

DCD

XMT/RCV

ETHERNET

34000

DCD

SYNC

34001

Net module

positions 1 and 2

Net module

positions 3 and 4

DCD

SYNC

34001

ASN0042A

CONSOLE

SPEX

SLOT

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 71 72

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Synchronous Net Modules in an ASN Platform Instrukcja Użytkownika Strona 25

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Routery Avaya Synchronous Net Modules in an ASN Platform