Avaya VoIP Monitoring Manager Reference Release 3.1 Instrukcja Użytkownika Pobierz pdf (Strona 56)

Avaya VoIP Monitoring Manager Reference

Table of Values for Summary Reports of Endpoints

Jitter (ms) Round Trip Time (ms) Loss (%)

0 to 50ms 0 to 180ms 0 to 10%

Acceptable

Conversation was

smooth.

Acceptable

No delay between each

endpoint.

Acceptable

No drop out in conversation.

50 to 150ms 180 to 500ms 10 to 30%

Warning

Crackling, static or

intermittent delay could be

reported.

Warning

Slight pause in the conversation

at the lower end of the range to

more lengthy delays at the top

end of the range could be

reported.

Warning

Drop out and missing parts of

the conversation could be

reported.

> 150ms > 500ms > 30%

Not Acceptable Not Acceptable Not Acceptable

Y-axis

The Y-axis on the Detailed Reports line graphs is the vertical area of the report, covering the top

to the bottom of the graph. The top of the Y-axis represents the upper levels for each of the QoS

parameters and the bottom of the Y-axis represents the lower levels. You can point your mouse

at the samples on the line graph and the exact time and QoS value will display. For more detailed

information, see the topic on About Detailed Reports and/or Interpreting Detailed Reports.

Different Scales for Each QoS Parameter

The QoS parameters have different values. To represent each parameter on the same report, the

Y-axis has a different scale that suits each QoS parameter. These scales are shown on the Y-

axis in their respective colors.

X-axis

The X-axis on the Detailed Reports represents the date range. It is the horizontal area of the line

graph, from the left to the right of the report. The start of the date range begins from the left of the

horizontal axis and continues until the end of the date range on the far right side.

Alter the Date Range to Show More Detail

You can alter the date range to a shorter date or longer date period to see more or less detail.

Gateway

The Results List will display one or more phone numbers next to the Gateway endpoint type.

These phone numbers are the phone numbers for which that the Gateway is acting as an

intermediary. Therefore, the phone number of the Gateway can change and can be multiple

phone numbers. The Results List will separate endpoints involved in a session with a comma (,).

Conferenced calls are separated by a colon (:).

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 113 114

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya VoIP Monitoring Manager Reference Release 3.1 Instrukcja Użytkownika Strona 56

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Oprogramowanie Avaya VoIP Monitoring Manager Reference Release 3.1