Avaya Configuring IP Utilities Instrukcja Użytkownika Strona 26

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 96
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 25
Configuring IP Utilities
1-2 114071 Rev. A
Configuring IP on a Circuit
Before you can select TCP, FTP, Telnet, and NTP to run on the router, you must
configure a circuit and add the IP protocol to it, using the default values. IP uses
this circuit as an interface to the attached network. For instructions on adding IP to
a circuit, refer to Configuring IP Services.
With these tasks completed, you have a fully operational IP connection configured
with the default values.
Starting TCP
This section describes how to get TCP started on a circuit and how to create and
delete TCP on a router. It assumes you have read Configuring Routers.
Creating TCP on a Router
To enable TCP on your router after you have configured IP on a circuit, you can
configure TCP services globally on the same circuit.
You configure TCP services globally using Site Manager.
Site Manager Path: From the Configuration Manager window, select Protocols > Global
Protocols > TCP > Create TCP. The Edit TCP Global Parameters window opens, allowing
you to edit the TCP global parameters.
Przeglądanie stron 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 95 96

Komentarze do niniejszej Instrukcji

Brak uwag