Avaya Configuring and Troubleshooting Bay Dial VPN (DVS) Networks Instrukcja Użytkownika Strona 163

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 162
Troubleshooting
303509-A Rev 00 C-19
Remote Access
Concentrator does not
advertise updates.
1. Is the RAC parameter
routed
set to
N
?
2. Did you reboot the RAC after
setting
routed
?
3. Is the RAC parameter
option_key
set to allow active RIP, and did you
reboot the RAC after setting
option_key
? Issue the CLI
command
stats –o
to verify that
active RIP is enabled.
If the display shows RIP as enabled,
something else is preventing the RAC
from sending updates.
Use the following CLI commands to
obtain information about IP routing on
your network:
To display the contents of the RAC
routing table, use
netstat –r
.
To display the contents of the
routing cache (containing
user-configured routes), use
netstat –C.
1. Verify that the RAC
routed
parameter is set to
Y
.
2. If necessary, reboot the RAC.
3. See the description of enabling and
disabling active RIP in
Managing
Remote Access Concentrators
Using Command Line Interfaces
.
Use the
stats -o
command to display
the status of the options. Only those
options that are keyed off appear in the
display:
annex:
stats –o
KEYED OPTIONS:
LAT: keyed off
MODULES DISABLED None
The
MODULES DISABLED
field
indicates the current setting of the
disabled_modules
parameter. If a
dialout appears here as disabled, you
cannot use dialout, RIP, or filtering,
even if they are keyed on.
4. Is the RAC broadcast address set
correctly?
Verify the RAC broadcast address.
5. Are at least two interfaces up and
running?
Verify that at least two interfaces are up
and running.
(continued)
Table C-2. Remote Access Concentrator Troubleshooting Chart
(continued)
Problem/Symptom Possible Cause Action
Przeglądanie stron 162
1 2 ... 158 159 160 161 162 163 164 165 166 167 168 ... 189 190

Komentarze do niniejszej Instrukcji

Brak uwag