Avaya BCM50 Przewodnik Konfiguracji Strona 125

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 568
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 124
Chapter 9 Configuring telephony resources 125
Networking Configuration Guide
SIP Settings
Figure 32 SIP Settings tab
Table 24 SIP Settings fields
Field Value Description
Telephony Settings
Fallback to circuit-switched Enabled-All
Enabled-TDM
Disabled
Your choice determines how the system will handle calls if the
IP network cannot be used.
Enabled-All: All calls will be rerouted over specified PSTN
trunks lines.
Enabled-TDM: All TDM (digital telephones) voice calls will
be rerouted over specified PSTN trunks lines.
Disabled: Calls will not be rerouted.
Default: Enabled-All
SIP Settings
Domain Name Domain of the SIP network.
Call signaling port This is the listening port for the BCM
Note: FEPS (Functional Endpoint Proxy Server) must be
restarted if this values is changed.
Default: 5060
Outgoing Transport UDP The outgoing transport protocol for the gateway.
Note: UDP is the only transport supported by the SIP enabled
data services.
Default: UDP
Proxy Support
Proxy <IP address> Specify the IP address of the SIP proxy server.
Status <read-only> Indicates the status of the gateway.
Przeglądanie stron 124
1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 567 568

Komentarze do niniejszej Instrukcji

Brak uwag