
Configuring IP Multicasting Services
A-20 114064 Rev. A
ST2 Interface Parameters
Parameter: Enable
Path: Configuration Manager > Protocols > IP > ST2 > Interfaces
Default: Enable
Options: Enable
| Disable
Function: Enables and disables ST2 on this interface.
Instructions: By default, the router enables ST2 when you add the ST2 protocol to the
circuit. If you want to disable ST2 on the interface, use this parameter.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.2.1.2
Parameter: IP Address
Path: Configuration Manager > Protocols > IP > ST2 > Interfaces
Default: None
Options: Any valid IP address
Function: Specifies the IP address of this ST2 interface.
Instructions: Supply a unique IP address in dotted decimal notation.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.2.1.6
Parameter: Accept Time Out
Path: Configuration Manager > Protocols > IP > ST2 > Interfaces
Default: 10 seconds
Options: 1 to 999
Function: Specifies the time in seconds between ST2 accept message retries on this
interface.
Instructions: Use the default unless the application requires otherwise.
MIB Object ID: 1.3.6.1.4.1.18.3.5.16.1.2.2.1.7
Komentarze do niniejszej Instrukcji