Avaya Configuring IP Multicasting Services Instrukcja Użytkownika Strona 78

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 103
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 77
Configuring IP Multicasting Services
A-4 114064 Rev. A
Parameter: Estimated Routes
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: 25 routes
Options: An integer of 10 or greater
Function: Specifies the estimated number of routes.
Instructions: Enter a value that the router can use for preallocating routing tables. For an
MBone deployment, a value of 3000 or higher is recommended. Note that routes
are kept on a per-source-network basis, independent of multicast groups. This
number must include a route for every network that is local to a circuit
configured for multicasting. This is to allow the router to utilize memory
efficiently; exceeding this size during router operation will not cause an error but
may cause the router to consume more memory than is required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.10
Parameter: Neighbor Probe Interval
Path: Configuration Manager > Protocols > IP > Multicast > DVMRP > Global
Default: 10 seconds
Options: 5 to 30 seconds
Function: Specifies how often to send a probe on interfaces from which no neighbors
have been heard.
Instructions: If your neighbor is running DVMRP mrouted, ensure that your probe interval
value matches the value used by the neighbor.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.1.11
Przeglądanie stron 77
1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 102 103

Komentarze do niniejszej Instrukcji

Brak uwag