
Configuring IP Multicasting Services
2-2 114064 Rev. A
2. Supply the following information:
• An IP address for this interface. There is no default for the IP address.
You must supply an address or enter 0.0.0.0 to indicate that this is an
unnumbered interface. (For information about unnumbered interfaces, see
Configuring IP Services.)
• A subnet mask. When you specify an address, IP automatically calculates
an appropriate subnet mask, depending on the class of network. You can
use Site Manager to override the default mask.
• A transmit broadcast address. By default, IP uses a broadcast address that
consists of all ones. You can use Site Manager to override the default.
• An associated IP address. If you are configuring an unnumbered IP
interface, use Site Manager to supply an associated IP address.
3. Click on OK.
The Initial IGMP Global Parameters window opens.
4. Click on Save to accept the default parameters.
The Initial DVMRP Base Parameters window opens.
5. Click on Save to accept the default parameters.
The instructions in this chapter show you how to start IGMP and DVMRP using
all default values and settings.
For information on modifying the defaults, see
Chapter 3 and Chapter 4.
Site Manager: IP Address parameter: page A-17
Site Manager: Subnet Mask parameter: page A-17
Site Manager: Transmit Bcast Addr parameter: page A-18
Site Manager: UnNumbered Assoc Address parameter: page A-18
Komentarze do niniejszej Instrukcji