
Configuring WAN Line Services
B-34
308648-14.00 Rev 00
The output contains the following information:
Slot/Conn Slot location of the HSSI module within the chassis and
the connector number.
Circuit Name of the circuit associated with this line.
Operational State Current operating state of the line driver, as follows:
• BofLwait -- Driver is waiting for its own Breath-of-Life
(BofL) frames to be successfully transmitted or for a
BofL frame from the Nortel Networks router at the
other end of the WAN connection. This applies only to
the Wellfleet Standard protocol.
• CAwait -- External equipment, such as a modem,
DSU, or CSU, is not currently up.
• Init -- Module is initializing.
• LMIwait -- Driver is waiting for any of four WAN
protocols to indicate that a link layer connection has
been established to another entity. This applies to the
frame relay, SMDS, ATM, and PPP protocols.
• Not Pres -- Module is enabled but not yet started. This
state occurs for several reasons. For example, the link
module may not be physically present in the chassis.
The software may be booting and has not yet
initialized the driver software; the slot may be running
diagnostics; or there may be a problem with the
configuration.
Errors:
Receive Number of receive errors.
Transmit Number of transmit errors.
Bytes:
Receive Number of octets received without error.
Transmit Number of octets transmitted without error.
Frames:
Receive Number of frames received without error.
Transmit Number of frames transmitted without error.
Avg. Pkt.:
Receive Average packet size (number of bytes divided by number
of frames) received without error.
Transmit Average packet size (number of bytes divided by number
of frames) transmitted without error.
Komentarze do niniejszej Instrukcji