Avaya Configuring MPOA Services Instrukcja Użytkownika Pobierz pdf (Strona 93)

Site Manager Parameters

309249-14.00 Rev 00

A-7

MPS Operational Parameters

This section describes the operational parameters you can customize for a new

MPS.

Parameter: MPS Ctrl ATM Address Selector Byte

Path: Configuration Manager > Circuits > Edit Circuits >

Edit

ATM

MPOA

Server Attributes

MPS

Add

Default: None

Options: 00 to FF

Function: Specifies a 1-byte selector field for the MPS. You need only configure this

parameter when the control ATM address generate mode is manual.

The MPS uses the end-station identifier of the service record control ATM

address user part. However, each MPS must have a unique selector field value.

Instructions: Enter a unique 1-byte selector field for the MPS.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.10.2.5

Back to “Configuring a Unique Selector Byte for an MPS Address” on page

3-14.

Parameter: Enable/Disable

Path: Configuration Manager > Circuits > Edit Circuits >

Edit

ATM

MPOA

Server Attributes

MPS

Default: Enable

Options: Enable

Disable

Function: Enables or disables the selected MPS.

Instructions: Accept the default, Enable, if you want the MPS to remain enabled on this

interface. Select Disable if you do not want the MPS enabled on this interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.10.1.1.2

Back to “Disabling and Reenabling MPOA Servers” on page 3-8.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 147 148

Brak uwag

Avaya Configuring MPOA Services Instrukcja Użytkownika Strona 93