Avaya Configuring MPOA Services Instrukcja Użytkownika Strona 89

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 148
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 88
Site Manager Parameters
309249-14.00 Rev 00
A-3
MPOA Service Parameters
This section describes the parameters for configuring an ATM MPOA service
record.
Parameter: Enable/Disable
Path: Configuration Manager > Circuits > Edit Circuits >
Edit
>
ATM
>
MPOA
Server Attributes
Default: Enable
Options: Enable
|
Disable
Function: Enables or disables the MPOA service record on this interface.
Instructions: Accept the default, Enable, if you want the MPOA service record to remain
enabled on this interface. Select Disable if you do not want the MPOA service
record enabled on this interface.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.10.1.1.2
Back to “Disabling and Reenabling an MPOA Service” on page 3-2.
Parameter: MPS Address Generate Mode
Path: Configuration Manager > Circuits > Edit Circuits >
Edit
>
ATM
>
MPOA
Server Attributes
Default: Automatic
Options: Automatic
|
Manual
Function: Specifies whether the MPS uses the network prefix it receives from the local
switch (automatic mode) or uses address information that you specify (manual
mode).
Instructions: Accept the default, Automatic, if you want the server to use the network prefix it
receives from the local switch, and the MAC address from the underlying ATM
interface. Select Manual if you want the server to use the address information
(network prefix and user suffix) that you specify.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.10.1.1.7
Back to “Setting the MPS Address Generating Mode” on page 3-3.
Przeglądanie stron 88
1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 147 148

Komentarze do niniejszej Instrukcji

Brak uwag