
Site Manager Parameters
117355-C Rev 00
A-11
Parameter: Report Depend Probe
Path: Configuration Manager > Protocols > IP > DVMRP > Circuit
Default: Disable
Options: Enable
|
Disable
Function: Specifies the conditions under which DVMRP accepts a route report.
According to the protocol, DVMRP must send a probe packet before sending
the route report packet to its neighbors. Some vendor implementations,
however, do not send probes before sending reports.
Instructions: By default, DVMRP processes all received route reports. Enable this feature if
you want DVMRP to process only routes received from neighbors that send
probe packets.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.26
Parameter: Prune Life Time
Path: Configuration Manager > Protocols > IP > DVMRP > Circuit
Default: 7,200
Options: 0 to 86,400
Function: Specifies (in seconds) the lifetime of a prune message that DVMRP sends to a
neighbor on this interface.
Instructions: Set this parameter as required.
MIB Object ID: 1.3.6.1.4.1.18.3.5.3.12.2.1.27
Komentarze do niniejszej Instrukcji