
Configuring IGMP Relay
117355-C Rev 00
9-13
Using Site Manager
To configure upstream data forwarding:
Specifying the Relay Interface Type
Use the Type parameter to specify that the IGMP Relay interface is configured on
one of the following types of interface:
• A downstream interface connecting the IGMP Relay device to IGMP hosts
(the default)
• An upstream interface connecting the IGMP Relay device to the primary IP
multicast router
• An upstream interface connecting the IGMP Relay device to the backup IP
multicast router
You can use the BCC or Site Manager to specify the interface type.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose
Protocols
.
The Protocols menu opens.
2. Choose
IP
. The IP menu opens.
3. Choose
IGMP/IGMP Relay
. The IGMP menu opens.
4. Choose
Global
. The IGMP Global Configuration window
opens.
5. Set the
Relay Upstream Forwarding
parameter. Click on
Help
or see the
parameter description on page A-20.
6. Click on
Save
. You return to the Configuration Manager
window.
Komentarze do niniejszej Instrukcji