Avaya Configuring Frame Relay Services Instrukcja Użytkownika Pobierz pdf (Strona 88)

Configuring Frame Relay Services

3-18

117376-C Rev. 00

Enabling Multicast

The multicast feature sets up a separate DLCI that replicates broadcast packets

and forwards them to the appropriate destinations. You can enable support for

frame relay multicast service, but only if your frame relay subscription service

provides multicast service.

You can use either the BCC or Site Manager to enable multicast service.

Using the BCC

To enable multicast service, you must set the appropriate attribute for both the

interface and the PVC:

Navigate to the frame-relay prompt.

For example:

box; serial/1/2; frame-relay/1/2

Enter the

multicast-control

command and the value

enabled

multicast-control enabled

For example, the following command line enables multicast for this frame

relay interface:

frame-relay/1/2# multicast-control enabled

frame-relay/1/2#

Navigate to the prompt for the PVC that you want to configure as

multicast.

For example:

box; serial/1/2; frame-relay/1/2; service/4.0.32; pvc/1/2/51

5. Select the DLCI of the PVC to be moved,

and click on

Move

The Frame Relay PVC Move window

opens.

6. Click on

. The FR Service Record Selection window

opens.

7. Click on the target service record and click

Select

The FR Service Record Selection window

closes, revealing the change in the FR

PVC List for Service window.

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 239 240

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring Frame Relay Services Instrukcja Użytkownika Strona 88

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Avaya Configuring Frame Relay Services