Avaya Configuring Frame Relay Services Instrukcja Użytkownika Strona 82

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 94
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 81
Configuring Frame Relay Services
A-16 117376-A Rev. A
Parameter: Hybrid Mode
Path:
Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Frame Relay Circuit Definition window > Services > Frame Relay
Service List window > PVCs > Frame Relay PVC List for Service window
Default: OFF
Options: ON
| OFF
Function: Allows you to use the same PVC for both routing and bridging.
Instructions: Set to ON if you want to enable both routing and bridging services. If not,
accept the default.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.1.2.1.24
Parameter: Committed Burst
Path:
Configuration Manager (select a connector) > Edit Connector window > Edit
Circuit > Frame Relay Circuit Definition window > Services > Frame Relay
Service List window > PVCs > Frame Relay PVC List for Service window
Default: 0
Options: 0 to 2,147,483,647 bits
Function: The maximum number of bits that a VC can transmit during the VC’s burst
period (Tc) when congestion is occurring. To enable traffic shaping, this
parameter and the Throughput parameter (CIR) must both be greater than zero.
The Committed Burst (Bc) value should be lower than the Throughput.
Instructions: Enter a value within the given range. We recommend that you set this parameter
to 1/4 of the CIR unless this VC is sending frames larger than that size. If the
VC is sending large frames, increase the value of this parameter to
accommodate the size of those frames.
MIB Object ID: 1.3.6.1.4.1.18.3.5.9.9.2.1.16
Przeglądanie stron 81
1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 93 94

Komentarze do niniejszej Instrukcji

Brak uwag