Avaya Configuring Ethernet, FDDI, and Token Ring Services Instrukcja Użytkownika Pobierz pdf (Strona 42)

Configuring Ethernet, FDDI, and Token Ring Services

3-4

305259-A Rev 00

Using Site Manager

To disable or reenable a FDDI interface, complete the following tasks:

Enabling or Disabling BofL Messages

With BofL enabled, the router sends polling messages from this interface to all

systems on the local network. BofL messages signify that the FDDI interface is up

and functioning normally when there is no data traffic.

If the link becomes unavailable and both this parameter and the LLC Data Enable

parameter are enabled, the router disables the LLC interface after the time you

specify using the BofL Timeout parameter. When you set this parameter to

Disable, the router disables the Logical Link Control (LLC) interface immediately

after the link becomes unavailable.

By default, BofL messages are enabled when you add the circuit. You can disable

and reenable BofL messages on a FDDI interface.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose a

FDDI

Connector.

The Edit Connector window opens.

2. Choose

Edit Line

. The Edit FDDI Parameters window

opens.

3. Set the

Enable

parameter. Click on

Help

or see the parameter description on page

page A-5

4. Click on

. You return to the Edit Connector window.

5. Click on

Done

. You return to the Configuration Manager

window.

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 135 136

Brak uwag

Avaya Configuring Ethernet, FDDI, and Token Ring Services Instrukcja Użytkownika Strona 42