Avaya ATM Link Modules and Routing Engines in BN Platforms Instrukcja Użytkownika Pobierz pdf (Strona 31)

Installing ARE Processor Modules

114951-B Rev 00

2-5

Removing the EMC Shield

You must remove the EMC shield to access the processor modules in BN

platforms.

To remove the EMC shield (Figure 2-4)

Attach an antistatic wrist strap.

BN platforms and link modules ship with an antistatic wrist strap. You must

wear one of these straps whenever you access components in a platform.

The antistatic wrist strap directs the discharge of static electricity from your

body to the chassis, thereby avoiding discharge and possible damage to

sensitive electronic components.

Loosen the captive thumbscrews that fasten the EMC shield to the

chassis.

Remove the EMC shield from the chassis.

Caution: Do not operate a BN platform with the EMC shield removed for

more than 5 minutes. Without the EMC shield, the BN platform may overheat.

In addition, the BCN contains temperature sensors that may not detect an

overheating condition without the shield in place.

Caution: Electrostatic discharge can damage hardware. Always use the

antistatic wrist strap when handling any component in the BN platform.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 45 46

Brak uwag

Avaya ATM Link Modules and Routing Engines in BN Platforms Instrukcja Użytkownika Strona 31