
1. UFTP download initiated by the server if the server supports this method of
upgrading UNIStim software. Refer to the appropriate documentation for your Call
Server for instructions on using this method.
2. TFTP download on bootup.
If necessary, use the following procedure to configure the TFTP server.
Configuring the TFTP server
1. The 1200 Series IP Deskphones always execute the TFTP download at bootup if a
TFTP IP address is configured on the IP Deskphone after being initiated by the
telephony Call Server.
2. Go to the TFTP server and create the 12xx.cfg provisioning file. The 12xx.cfg
provisioning file is a clear text file. Create the provisioning file as shown in the next
table.
Table 10: Sample 12xx.cfg provisioning file
[FW]
DOWNLOAD_MODE FORCED
VERSION 062AC5L
FILENAME SIP12x004.01.03.00.bin
This configuration file forces the software download of SIP12x004.01.03.00.bin.
3. Download and copy the software to the TFTP server directory.
To download the UNIStim software for the IP Deskphone from the Avaya Web site:
a. Go to
http://www.avaya.com/support.
b. Log on to the Avaya Web site with a valid Avaya User ID and
Password.
The Support page appears.
c. Enter the IP Deskphone type in the Knowledge and Solution Engine
box.
d. Select SOFTWARE in the ALL TYPES scroll-down menu.
e. Press the gray arrow at the end of the Knowledge and Solution Engine
box to obtain the Search Results.
f. From the Search Results, select the appropriate version of the UNIStim
software for the IP Deskphone, for example, IP Phone 1230 Release
0625C23.
g. Place the selected software in the correct directory on the provisioning
server.
4. In the IP Deskphone Network Configuration menu, change the TFTP server
address and enter the correct TFTP server address.
Upgrade to the minimum UNIStim Software
SIP Software for Avaya 1200 Series IP Deskphones-Administration January 2012 93
Komentarze do niniejszej Instrukcji