Avaya Connecting BayStack AN and ANH Platforms to a Network Instrukcja Użytkownika Pobierz pdf (Strona 72)

Connecting BayStack AN and ANH Systems to a Network

4-12

Parameter: Connector Subnet Mask

Default: None

Options: Any valid IP subnet mask

Function: Speciﬁes the network and subnetwork portion of the 32-bit IP address of

this interface.

The Conﬁguration Manager automatically calculates an appropriate

subnet mask, depending on the class of the network to which the interface

connects. However, you can change the subnet mask with this parameter.

Instructions: Either accept the assigned subnet mask or enter another subnet mask, in

dotted decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.5

Parameter: Connector Next Hop

Default: None

Options: Any valid IP address

Function: Speciﬁes the IP address of the next-hop router connected to this interface.

When the router starts up, the next-hop router passes the BOOTP requests

and responses that initiate the transfer of the image and/or conﬁguration

ﬁle between the router and the BOOTP server. If the router and BOOTP

server are on the same IP subnet, you do not have to set this parameter.

Instructions: Enter the IP address of the next-hop router connected to the interface you

are adding, in dotted decimal notation.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.6

Parameter: Connector Protocol Mask

Default: Point to Point

Options: Point to Point

| Point to Point Internal Clock | Fr Relay Annexd | Fr Relay

Annexa

| Fr Relay LMI

Function: During the boot process, the router will conﬁgure the synchronous

interface to the speciﬁed protocol.

Instructions: Specify the desired protocol option.

MIB Object ID: 1.3.6.1.4.1.18.3.3.2.10.3.1.7

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 167 168

Brak uwag

Avaya Connecting BayStack AN and ANH Platforms to a Network Instrukcja Użytkownika Strona 72