Avaya Business Communications Manager - CallPilot Message Networking Instrukcja Użytkownika Pobierz pdf (Strona 41)

Chapter 4 Creating network sites 41

CallPilot Message Networking Set Up and Operation Guide

To create a network site

1 Start Avaya CallPilot Manager.

2 Click the Networking heading.

The Site List page appears.

3 Click Add.

The Network Site Properties page appears.

4 In the Site Name box type the Site Name.

5 In the Site Prefix box type the Site Prefix.

6 Choose the type of site you are adding.

If you want to create a Digital Networking site:

• from Site Type select Digital (VPIM)

• if you use a DNS server, in the Host Name box type the FQDN of the site, or if you do

not use a DNS server, in the IP Address box type the IP address of the site

•in the Mailbox Prefix box type the mailbox prefix of the site

• click Submit

• If you want to create an AMIS site:

• from Site Type select AMIS

•in the Phone Number box type the phone number that is answered by the Auto

Attendant at the destination site.

• from the Outdial list box select an Outdial route.

• type the Line or Pool number in the Line/Pool # box if you select Line or Pool as the

Outdial route.

• click Submit

You can record the parameters of the sites you create in:

• “Network AMIS mailbox table” on page 63

• “AMIS site table” on page 60

Note: VPIM requires all SITES to use either IP Addresses or Host Names.

Note: You must create a site before you can record a site name for it. To record a site

name, follow the procedure for “Recording a site name” on page 43.

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 69 70

Brak uwag

Avaya Business Communications Manager - CallPilot Message Networking Instrukcja Użytkownika Strona 41