
Customizing IGMP
117355-A Rev. A 3-13
Enabling and Disabling IGMP on an Interface
When you add a multicasting protocol to an IP interface, IGMP is automatically
enabled on the interface.
You can use the BCC or Site Manager to disable and reenable IGMP on the
interface
Using the BCC
Navigate to the IGMP prompt for the interface and enter
state
state
state is
enabled
disabled
Using Site Manager
Note: IGMP is required for multicasting to function on the interface.
Site Manager Procedure
You do this System responds
1. In the Configuration Manager window,
choose Protocols.
The Protocols menu opens.
2. Choose IP. The IP menu opens.
3. Choose Multicast. The Multicast menu opens.
4. Choose IGMP. The IGMP menu opens.
5. Choose Entry. The IGMP Entry Interface Parameters
window opens.
6. Set the Enable parameter. Click on Help
or see the parameter description on page
A-18.
7. Click on Apply, and then click on Done. You return to the Configuration Manager
window.
Komentarze do niniejszej Instrukcji