
Starting Multicasting and Multimedia Services
117355-A Rev. A 2-29
Starting DVMRP
To start DVMRP on the router:
1. Configure a circuit on a slot and connector.
2. Configure an IP interface on the circuit.
3. Add DVMRP to the IP interface.
For information and instructions on using Site Manager to configure a circuit on a
slot and connector, see Configuring WAN Line Services or Configuring Ethernet,
FDDI, and Token Ring Services. When you have successfully configured the
circuit, the Select Protocols window opens. Proceed as follows:
When you configure DVMRP on an IP interface, DVMRP is also configured
globally on the router.
DVMRP is now running on the router with default values for all global and
interface parameters. You customize DVMRP by modifying DVMRP parameters.
For information and instructions, see Chapter 4.
Site Manager Procedure
You do this System responds
1. In the Select Protocols window, choose
the following protocols:
• IP
• DVMRP
Then click on OK.
The IP Configuration window opens.
2. Set the following parameters:
• IP Address
• Subnet Mask
• Transmit Bcast Addr
• UnNumbered Assoc Address
Click on Help or see the parameter
descriptions beginning on page A-20.
3. Click on OK. Site Manager returns you to the
Configuration Manager window.
Komentarze do niniejszej Instrukcji