Avaya Configuring Dial Services Instrukcja Użytkownika Pobierz pdf (Strona 478)

100

101

Configuring Dial Services

B-16

308621-14.00 Rev 00

If you are using selective PRI service (that is, some B channels are blocked), the

timeslots that you configure as B channels should be the same channels assigned

by the switch provider. For example, if the provider assigns you channels 1 to 10,

configure timeslots 1 to 10 as B channels.

Demand Pool Configuration

After configuring ISDN interfaces, these lines can be included in a demand pool.

To configure a demand pool, complete the following tasks:

5. Choose

Select All

then click on

. You return to the PRI Logical Lines

window.

6. Accept the default MTU size, click on

Apply

, then click on

7. Click on

Done

. You return to the Configuration Manager

window.

Site Manager Procedure

You do this System responds

1. In the Configuration Manager window,

choose

Dialup

The Dialup menu opens.

2. Choose

Demand Pools

. The Demand Pools window opens.

3. Click on

Add

. The Demand Pool Configuration window

opens.

4. Set the

Pool ID

parameter to

then click

The Demand Lines Definition window

opens.

5. Click on either the

MCT1

connector

(router 1) or the

ISDN1

connector

(router 2).

The ISDN Switch Configuration window

opens.

6. Set the

Switch Type

parameter as follows:

• Router 1:

PRI 5ESS

• Router 2:

BRI

NI1

The ISDN Logical Lines window opens.

7. Accept the defaults, then click on

. You return to the Demand Lines Definition

window.

(continued)

Site Manager Procedure

(continued)

You do this System responds

1 2 ... 473 474 475 476 477 478 479 480 481 482 483 ... 551 552

Komentarze do niniejszej Instrukcji

Brak uwag

Avaya Configuring Dial Services Instrukcja Użytkownika Strona 478

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Podręczniki do oprogramowania Avaya Configuring Dial Services