Avaya SIP DECT Fundamentals Instrukcja Użytkownika Strona 128

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
Przeglądanie stron 127
128 SIPN configuration
TN format: L s cu, where L = virtual superloop,
s = shelf, c = card, and u = unit.
13 Click Edit to configure Class of Service (CoS).
14 Select Digitone Dial Pulse (DTDP) for Dial Pulse.
15 Click Return Class of Service.
16 Select Advanced Trunk Configurations and select the Answer
and disconnect Supervision required (SUPN) check box.
17 Click Save.
--End--
Configuring network access
Configure network access using Element manager.
Procedure 62
Configuring network access
Step Action
1 Select Dialing & Numbering Plans > Electronic Switched
Network from the menu.
2 Select Customer X > Network Control & Service > Network
Control Parameters (NCTL) > Network Control Basic
Parameters, and click Edit.
3 Click Submit.
--End--
Creating ESN control block
If the ESN control block is not configured, create an ESN control block by
using Element manager.
Procedure 63
Creating ESN Control Block
Step Action
1 On the ESN page, select Customer X > Network Control &
Service > ESN Access Code & Parameters (ESN).
The ESN Access Codes and the Basic Parameters page
appears.
2 Enter 10 for MXDM/MXRL/MXIX/MXFC/MXFS/MXLC/MXSC, 9
for AC1, 6 for ERDT, 0 for MXSD.
Nortel Communication Server 1000
SIP DECT Fundamentals
NN43120-123 02.02 30 March 2010
Copyright © 2008-2010 Nortel Networks. All Rights Reserved.
.
Przeglądanie stron 127
1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 291 292

Komentarze do niniejszej Instrukcji

Brak uwag