Avaya Configuring MPLS Services Instrukcja Użytkownika Pobierz pdf (Strona 72)

Configuring MPLS Services

A-2

305754-A Rev 00

To access parameters from the Edit MPLS Connector window:

In the Configuration Manager window, click on an ATM link module

interface (labeled ATM1).

The Select Connection Type window opens.

Click on MPLS.

The Edit MPLS Connector window opens.

Click on the appropriate attribute category.

LDP Parameters

The following parameters define the LDP.

Note:

You cannot run both ATM and MPLS on the same ATM interface.

Parameter: Enable/Disable

Path: Configuration Manager > Circuits > Edit Circuits >

Edit

MPLS

LDP

Default: Enable

Options: Enable

Disable

Function: Enables or disables the Label Distribution Protocol (LDP) for this MPLS

interface.

Instructions: Accept the default, Enable,

to allow MPLS LDP to operate over the interface.

Disable the session to turn off MPLS LDP on the interface.

MIB Object ID: 1.3.6.1.4.1.18.3.5.9.15.1.1.2

1 2 ... 67 68 69 70 71 72 73 74 75 76 77 ... 91 92

Brak uwag

Avaya Configuring MPLS Services Instrukcja Użytkownika Strona 72