Avaya Configuring Interface and Router Redundancy Instrukcja Użytkownika Pobierz pdf (Strona 57)

Configuring Router Redundancy

114079 Rev. B 5-9

Parameter: Send PDU Enable

Default: Enable

Options: Enable

| Disable

Function: Enables or disables sending of router redundancy PDUs on a per-circuit

basis. This parameter is automatically set to Enable when you choose

Router Redundancy from the Select Protocols window.

At least one interface on each router in the group must have this

parameter enabled so that all routers in the group receive status

information about each other. You may want to disable this parameter on

some redundant interfaces to minimize network trafﬁc on a busy

interface.

Instructions: Choose Enable or Disable.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.2.1.6

Parameter: Primary MAC Address

Default: None

Options: Any unique, 48-bit MAC address that the network manager provides

Function: The primary router uses the MAC address to route data. When the

primary router fails and a backup router becomes the new primary router,

the new primary router assumes this MAC address.

Instructions: Enter a unique MAC address.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.2.1.4

Parameter: Group ID

Default: 1

Range: 1 to 128

Function: Speciﬁes the identiﬁcation number for the redundancy group. Each group

ID number in a network must be unique.

Instructions: Enter a number from 1 to 128 that you have not already assigned to a

redundancy group on the network.

MIB Object ID: 1.3.6.1.4.1.18.3.5.17.1.4

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 91 92

Brak uwag

Avaya Configuring Interface and Router Redundancy Instrukcja Użytkownika Strona 57