Avaya Configuring Interface and Router Redundancy Instrukcja Użytkownika Strona 27

  • Pobierz
  • Dodaj do moich podręczników
  • Drukuj
  • Strona
    / 92
  • Spis treści
  • BOOKMARKI
  • Oceniono. / 5. Na podstawie oceny klientów
Przeglądanie stron 26
Interface Redundancy Overview
114079 Rev. B 1-5
You find the complete MAC address for the active interface in the interface
management information base (MIB) -- Ethernet or FDDI -- of the router on
which interface redundancy is configured. For example, if you are configuring
Ethernet, you can find the active MAC address in the Ethernet MIB by entering
the following command from the Technician Interface:
get wfCSMACDEntry.wfCSMACDMadr.*
Among the entries displayed in the MIB is the MAC address
0x 2
y yy
A2
xx xxxx
, which is used for interface redundancy. If you configure
more than one interface redundancy group on the same router, you will see more
than one entry with the same MAC address. This is not a problem because the two
redundancy groups are in different subnets.
Przeglądanie stron 26
1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 91 92

Komentarze do niniejszej Instrukcji

Brak uwag