Avaya Configuring Ethernet, FDDI, and Token Ring Services Instrukcja Użytkownika Pobierz pdf (Strona 31)

Configuring Ethernet Services

117344-A Rev. A 2-7

The BofL Timeout interval is 5 seconds by default. You can change the interval of

BofL messages to a value from 1 to 60 seconds.

Using the BCC

To change the interval of BofL messages on an Ethernet interface, access an

existing Ethernet line service and enter:

boﬂ-timeout

is the timeout value expressed in seconds. You can enter any integer

value between 1 and 60.

For example, to set the timeout value to 10 seconds:

box> ethernet slot 13 connector 1

ethernet/13/1> bofl-timeout 10

Using Site Manager

Complete the tasks in the following table to change the interval of BofL messages.

Site Manager Procedure

You do this System responds

1. In the Conﬁguration Manager window,

choose an XCVR Connector.

The Edit Connector window opens.

2. Choose Edit Line. The Edit CSMA/CD Parameters window

opens.

3. Set the BofL Timeout parameter. Click on

Help or see the parameter description on

page A-2.

4. Click on OK. Site Manager returns you to the Edit

Connector window.

5. Click on Done. Site Manager returns you to the

Conﬁguration Manager window.

Note: In Site Manager, the BofL Timeout parameter is valid only if you set

BofL Enable to Enable.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 93 94

Brak uwag

Avaya Configuring Ethernet, FDDI, and Token Ring Services Instrukcja Użytkownika Strona 31