Avaya an Expansion Module in a BayStack ARN Router (114202 Rev. A) Instrukcja Użytkownika Pobierz pdf (Strona 29)

Installing the Expansion Module

114202 Rev. A 1-7

Disconnect the power cable from its connector on the expansion module

(refer to Figur

e 1-6).

Pull up on the white tabs in the connector to loosen the cable.

3. Holding the expansion module at either end of its base module connector,

pull straight up to detach the connector from the base module socket.

Be prepared to use some force at ﬁrst, but stop pulling once the two

connectors are free.

4. With the interface connectors resting inside the chassis expansion slot,

pull up until the module rests at a 90-degree angle to the base module.

5. Keeping the expansion module perpendicular to the base module, slide

the interface connectors horizontally toward the rear of the chassis until

the module clears the top of the tray assembly and you can remove it

(Figur

e 1-7).

Figure 1-7. Removing the Expansion Module

ARN0051B

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 39 40

Brak uwag

Avaya an Expansion Module in a BayStack ARN Router (114202 Rev. A) Instrukcja Użytkownika Strona 29